Brazing Diamond Cylindrical Grinding Head

Brazed diamond grinding wheel, surface attached with a layer of ordered diamond particles, economic and durable, the most fine particle size up to 200 mesh, used for marble, rock plate, cast iron, etc.  Wear resistant to sand, no deformation, no breakage, fast grinding speed. 

grinding head

Metal Bonded Diamond Drill Bits

Grinding Points And Wheel

Chemical metallurgical bonding of metal matrix interface has high bonding strength  

Degrees.  Because of the high bonding strength at the interface, only very thin junctions are required  

The thickness of the mixture is sufficient to hold the abrasive firmly, and the exposed height is acceptable  

Recognize 70%~80%, so that the use of abrasive more fully, greatly improved  

Tool life and processing efficiency.  Compared to traditional techniques, the maximum allowable edge value of diamond tools can be increased by more than 50% in the tool  

The power consumption does not increase or decrease somewhat under the condition of unit volume on the workpiece  

The diamond consumption of the material is reduced by more than half.  Phase with electroplating tool  

Than, also showed an incomparable advantage. 

Kemei produces all types of Grinding Heads, including aluminum oxide grinding head, pink rotary tools, Diamond Grinding Heads, polishing mouted point, and all shapes of grinding stones. For any type and size, contact us please.